

IT’S SIMPLY A QUESTION
OF TIME
High End / Professional Studio Monitor MSM c1
Extremely quick recognition or ponderous repetition?
Our sense of hearing is not just the frequency analyser
it is often described as. On the contrary we humans
perceive and evaluate in a temporal sequence first
of all the noises, the so-called transients and
then the tones (repetitions, frequencies) of the
music. Each natural tone is preceded by such a
transient noise.
These transients communicate to our sense of hearing
the location of a sound source, e.g. where an instrument
is located, and what type of sound source is involved,
including its size. So that music, as a complex mixture
of transients and tones, can be reproduced naturally,
it needs an extremely fast sound transducer with
precision operation.
The Manger sound transducer (MSW) operates using
the principle of bending waves and is a broadband
sound transducer that reproduces music and other
sound events without any delay and without any energy-storing
forces. The extremely fast rise time of less than
13µs and the broad frequency range of 80Hz – 40kHz
allow extremely fast transients and
Highly complex musical structures to originate naturally
from a single point source. A true spatial representation
of the instruments and an extraordinarily trueness
to detail in the resolution of the music are the
result.
A fast drive is required to achieve the fast reaction
time of 13µs. Our in-built power amplifier
for the MSMC1 achieves a performance bandwidth of
250kHz, which is equivalent to a rise time of 2µs.
This speed is necessary to ensure that the quality
between the low-power signal (output mixing console,
or source component) and high-power signal (output
power amplifier) is maintained.
A progression of ideas
A fast sound transducer, the corresponding power
amplifiers and a bass unit for effortless reproduction
of even the lowest octaves are certainly not the
end of this development. We have thought of various
adjustment features to make a sound engineer's life
that much easier. These include room adaptation filters,
near-field/cinema-screen EQ settings, and an input
trimming stage controller, that can accurately set
the two-channel or multi-channel equality to within
a tenth of a dB. And that's not all: conveniently
placed handles for transporting this 30 kilogram
heavyweight, a perfect matching, movable stand, available
in different heights, a dockable bass unit as an
optional extra, a self-explanatory operating console
with a clear layout, and finally an attractive design
that is still mindful of the needs of the user.
PRICES |
MSM
c1 fully active professional monitor
including matching MSM c1 87cm stands |
£6900.00 pair |
MSM
c1 fully active professional monitor
including Gas Adjustable stands |
£8300.00 pair |
MSM
c1 optional extras
MSM c1 Dockable bass module |
£1200.00 pair |
MSM
c1 optional extras
MSM c1 Gas Adjustable Stands |
£2500.00 pair |
MSM
c1 optional extras
Holoprofile sound deflectors |
£235.00
pair |
Delivery
within the UK is next day (TNT/insured) cost £12.00
to £100.00 depending on product
Available
in Slate Grey
General Specifications |
|
| Type |
Amplified 2Way System |
| Frequency Range |
30Hz - 40kHz |
| Crossover Frequency |
330Hz |
| Maximum Output Level |
110dB peak |
| Dimensions (H x W x D) |
495 x 270 x 424mm |
| Weight |
30kg |
Speaker Units |
|
HF
|
Manger Sound Transducer, bandwidth 80 - 40kHz,
risetime 13µs |
LF
|
200mm fibreglass-Polyester sandwich cone, 38mm
voice-coil |
| Enclosure |
Closed |
Amplification Unit |
|
Maximum Output Power |
LF: 250W at 8Ohms, 400W at 4Ohms (with optional
LF-Module)
HF:180W at 8Ohms |
| Bandwidth |
HF: 250kHz (-3dB) |
| Input Sensitivity |
6dBu (1,55V) or 0dBu |
| Input Impedance |
10kOhm |
| Controls |
Input Trim switch: 11 positions (-2,5dB to
2,5dB)
Input Sensitivity switch: 6dBu, 0dBu
Polarity switch
AV-Filter: High Pass Filter (80Hz, 12dB)
LF-Module switch: LF -6dB
Room Acoustics Correction switch: Highpass at 100Hz (+3dB, 0dB, -3dB, -6dB)
Nearfield-/Cinema Screen Correction switch: Bell at 3,25kHz, 1,0oct. (+3dB, 0dB,
-1,5dB, -3dB)
High Frequency Trim switch: Shelv at 10kHz (+2dB, +1dB, 0dB, -1dB, -2dB)
|
| Input Connector |
XLR-3 |
| Power Indicator |
Orange LED |
| Limiter Indicator |
Green/red LED |
| Accessories |
MSM c1 Stand, moveable, individual heights
available |
Click
icon to download
MSMC1 information and specification - 189
KB
|
 |
|
|